ZETRON 360 Manual de instrucciones descargar pdf (Pagina 68)

Troubleshooting and Repair

68 025-9459E

 To install the EPROM:

1. Turn off the power. For the remote, unplug the wall transformer. For the radio

interface, unplug the cable to the radio.

2. Remove the cover of the unit.

3. Locate and remove the old EPROMs from the board.

4. Install the new EPROMs in the designated sockets with the orientation notches

aligned with the notches in the sockets. Make sure that the EPROMs are fully

seated, and that no pins are bent.

5. Replace the cover of the unit.

6. Apply power to the unit and verify that the system operates properly.

7. Return the old EPROMs to Zetron in the protective shipping material.

Assembly Drawings

The following two pages contain the assembly drawings for the remote desk set and the

radio interface unit that make up a Model 360 system.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 76 77

Sin comentarios

ZETRON 360 Manual de instrucciones Pagina 68