ZETRON 360 Manual de instrucciones descargar pdf (Pagina 57)

Remote Controls

12-Key Keypad

The 12-key keypad mimics the keypad on the radio microphone. It is used primarily to

send DTMF over the air. In addition, each key can be assigned a secondary function

similar to the other programmable keys. In order to use these secondary functions, one of

the normal programmable keys must be set to Function. To activate the secondary

function of a keypad key, press the Function key. The LED next to the Function key will

turn on to indicate that the secondary functions are now accessible. Then press the

keypad key. The secondary function of that keypad key will be activated, and the LED

next to the Function key will turn off. As long as the function LED is on, pressing a

keypad key will access its secondary function.

Pressing the Function key a second time will turn the Function LED off and the keypad

can be used for DTMF.

I'CM Key

The Intercom key enters and exits intercom mode.

Mute Key

The Mute key mutes and unmutes audio from both the front panel speaker and the

handset earpiece at the same time.

Pvcy Key

The Privacy key enters and exits privacy mode.

TX Key & Handset PTT Bar

The Transmit key and the handset PTT bar are both equivalent to the PTT switch on the

radio microphone. Pressing either of them outside of intercom mode will cause the radio

to key up and transmit audio. Note that audio will not be passed to the radio; however,

until the TX LED turns on indicating that the radio has acquired a channel.

If the remote system is in intercom mode, pressing either the Transmit key or the

handset PTT bar will cause audio to be passed to the other remotes, but will not key the

radio.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 76 77

Sin comentarios

ZETRON 360 Manual de instrucciones Pagina 57