ZETRON 360 Manual de instrucciones Pagina 14

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 77
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 13
Installation
14 025-9459E
Figure 3. Typical System Installation
Installation Steps
Installation of the Model 360 Radio Remote system is done in three phases:
Program the radios
Configure system components
Install and connect system components
Initialize the system
Before beginning installation, read all of this section and the Operations section to
become familiar with the components, the system functions, and how different settings
interact. Decide which system functions will be enabled on each remote. For example,
which remotes will be supervisors? Familiarity with the function and operation of the
system will make the installation easier and more efficient.
Radio Programming
This section covers using the appropriate version of Kenwood-supplied radio
programming software to configure the settings in the radio to be interfaced to the Zetron
Model 360 radio remote system.
TK-x80 Series Radio Programming on
page 15
TK-x180 Series Radio Programming on
page 16
NX-700/NX-800 Radio Programming on
page 22
Vista de pagina 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 76 77

Comentarios a estos manuales

Sin comentarios