ZETRON 2000 Series Especificaciones descargar pdf (Pagina 20)

Overview

20 025-9034AA

Quick Operation Checklist

1. [ ] Obtain a sample assortment of pagers that you will use on the paging system.

2. [ ] Select some phone numbers to use for pager testing.

3. [ ] Program these pagers into the Subscriber Database in the office computer (see

Managing the Subscriber Database with ZbaseW on page 55).

4. [ ] Optionally print out the Subscriber Database and check your work (see Print

Tab on page 78).

5. [ ] Transfer the Subscriber Database settings from the office computer to the

Model 2200 (see Update Paging Terminal on page 84).

6. [ ] Dial into the paging terminal using the phone numbers you set up in step 3 and

send a few test pages. Make sure you test all kinds of pagers: Tone Only, Tone +

Voice, Display, and Display + Voice.

7. [ ] If you have voice pagers, experiment with Voice Limits.

8. [ ] If you have display pagers, experiment with Display Limits, and Autoformat

Phone Numbers. Use the “*” key to make the hyphen “-” character. Use the “#”

key to terminate the display message and get the “page accepted” tones (see

Paging and PageSaver on page 21).

9. [ ] If you have Voice Prompts, program an Access Code in your Subscriber

Database and make your own prompts from any dial-in phone. Each subscriber can

have various types of Voice Prompts turned on and off (see Voice Prompts on page

45).

If you experience difficulties, consult the technician who installed the system and get

some hints. That person should have sent a few test pages when they did the installation. If

you still have problems, contact Zetron Technical Support.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 231 232

Sin comentarios

ZETRON 2000 Series Especificaciones Pagina 20